Reference Guide

Error Code Message
161
The power cap value entered must be between 0 to 100 if unit is
percent.
162
Invalid IPv6 address. The IPv6 address cannot be link-local or
multicast.
163
Invalid IPv6 address. The IPv6 address specified has incorrect address
format.
164
Invalid IPv6 address. The gateway address specified has incorrect
address format.
165
Invalid IPv6 address. The Primary DNS server address specified has
incorrect address format.
166
Invalid IPv6 address. The Secondary DNS server address specified has
incorrect address format.
167
Invalid IPv6 address. The gateway address specified is invalid.
168
Invalid configuration. Attempting to apply IPv6 configuration on a non
supported platform.
169
Invalid IPv6 configuration. Attempt to set DNS server address manually
while DNS address source is set to auto.
170
Invalid IPv6 configuration. Attempt to set IPv6 address manually while
IPv6 address source is set to auto.
171
Invalid IPv6 configuration. Attempting to apply IPv6 configuration
without loading IPv6 stack.
172
Invalid IPv4 configuration. Attempting to apply IPv4 configuration
with IPv4 disabled.
173
Invalid IPv6 configuration. Ipv6 address cannot be specified without
specifying prefix-length.
174
Invalid IPv6 configuration. dnssrcv6 cannot be set to auto when
ipsrcv6 is set to manual.
175
Error while executing IPMI Set command.
176
Error while executing IPMI Get command.
177
Error during Trap Alert.
178
Unspecified error.
179
Unsupported device. Re-try with supported device.
180
Setup password is installed. Re-try providing setup/admin password.
181
System password is required. Re-try providing system password.
182
The password supplied is incorrect. Please try again.
183
Password verification failed.
184
Password not changed, new password does not meet criteria.
185
Password not installed in the system.
89