Reference Guide

Error Code Message
133
The system ID value is not available.
134
The system information string is not available.
135
A system error has occurred.
136
Usage error.
137
The uuid information is not present on this system.
138
The manufacturing/first-power-on date information is not present on
this system.
139
Version cannot be accompanied with any other option.
140
The self-identify blinker timer should be set to 0..255 second(s).
141
Encrypt key is too long.
142
Encrypt key is invalid, accepted characters are 0 to 9 or A to F.
143
Parameter has been temporarily disabled due to a dependency on other
settings.
144
The old password supplied is incorrect. The new password will not be
set. Please try again.
145
Cannot stat /etc/omreg.cfg file. Please ensure /etc/omreg.cfg file is
present and is valid for your environment. You can copy this file from
the DTK iso.
146
Getting nic selection settings failed.
147
HAPI Driver Load Error.
148
Filter action power reduction is only supported for the system power
warn/fail filters.
149
TPM Clear settings requires setup password.
150
There is currently no TPM Clear request pending.
151
Password is not required for retrieving the TPM options.
152
Setup password is required for setting the TPM options.
153
Invalid Password override.
154
Invalid TPM set option.
155
There was an error setting the TPM option.
156
There is no setup password installed on this system.
157
The setup password supplied is incorrect. Please try again.
158
Profile should be custom for setting cpupowermode, memorypowermode and
fanmode.
159
There was an error setting the Power Option.
160
The power cap value entered is out of range. Please try again.
88