Reference Guide

Error Code Message
103
The -x (--hex) option can only be used with -b or -r.
104
Input file '%s' not found.
105
Input file '%s' cannot be read.
106
Invalid argument for option '%s'.
107
Function table lookup error.
108
The machine ID was not found in the file '%s'.
109
The system memory information is not available.
110
Mode can only be used with the --pci option.
111
The device name or index must be present in the boot order.
112
The output file '%s' could not be opened. Please make sure. The path
exists and the media is not write protected.
113
Could not write to output file, disk may be full.
114
The old password must be supplied to set a new password using --
valsyspwd.
115
The old password must be supplied with a new password using --
valsetuppwd.
116
The current password can only be supplied when setting a new password.
117
Actions are not allowed for this filter. Only alerts are allowed.
118
There was an error getting the option '%s'.
119
The option '%s' is not available or cannot be configured through
software.
120
There was an error setting the option '%s'.
121
The -n (--namefile) option can only be used with --pci.
122
The password may only contain alphanumeric characters.
123
The BIOS passwords have been disabled via jumper.
124
The password length must be between 1 and 32.
125
This password is locked and can only be unlocked by the admin user.
126
There was an error setting the password.
127
The LCD string length must be between 1 and %s.
128
The LCD string may only contain alphanumeric characters.
129
There was an error setting the LCD string.
130
The second channel can only be set if the RAID controller is set to
RAID.
131
The set operation, '%s', requires sub commands.
132
The service tag for this system is not available.
87