Reference Guide
Error Code Message
74
The BIOS update file version is identical to the current system
bios.Use the --force option to use this BIOS image.
75
The sequence list must be a comma-separated numerical list of valid
unique boot. Device numbers (ex: 2, 1, 3).
76
The sequence list must be a comma-separated list of valid unique
device names (ex: nic.emb.1, hdd.emb.1) or a comma-separated numerical
list of valid unique boot device numbers (ex: 2, 1, 3).
77
There was an error setting the sequence.
78
The list is not formatted correctly. See the help for more details.
79
The size of returned buffer is larger than the size of allocated
buffer.
80
There was a problem getting the state byte.
81
The state byte is not available on this system.
82
There was a problem setting the state byte.
83
The state byte must be a value between 0 and 255 decimal.
84
The CPU information is not available.
85
The dependent option '%s' required for this subcommand is missing in
the command line.
86
Duplicate sub command '%s' has been entered.
87
The script file does contain not a valid DTK environment script
signature.
88
The format of the environment variable is incorrect.
89
The --envar/-s option can only be used for a single option.
90
The --envar/-s option can only be used for report operations.
91
The individual sub commands should be specified for the -s option.
92
Getting external serial connector settings failed.
93
Setting external serial connector settings failed.
94
There was an error opening the file %s.
95
File '%s' does not have write permission.
96
The file contains invalid option '%s'.
97
The replication information does not match for this system.
98
There can only be one section in the input file.
99
Bad ini file, the section [%s] cannot be found.
100
The format of the bios image file is incorrect.
101
Report operations and set operations must be separate.
102
Help is not available for the option '%s'.
86