Reference Guide

4
Sample File Formats
This appendix lists the sample Dell Client Configuration Toolkit (CCTK) utility.ini file.
Sample CCTK Utility.ini File Format
[cctk]
sysname=Latitude E6400
sysid=0233
biosver=A17
;svctag=6KDC4BS
;do not edit information above this line
acpower=off
amblightsen=disable
asset=ash
autoon=disable
autoonhr=8
autoonmn=0
bluetoothdevice=enable
bootorder=
+hdd.1,+usbdev,+floppy,+cdrom,+hdd.2,+hdd.3,+hdd.4,+
hdd.5,-hdd.6,-pcmcia,-nic
;Here '+' indicates Enabled device, '-' indicates
Disabled device.You can use DeviceNumber also to set
the boot order. Example: bootorder=+2,-1,+3
camera=enable
cellularradio=enable
cpuxdsupport=enable
embnic1=onnopxe
embsataraid=raid
energystarlogo=disable
esataports=enable
expresscharge=disable
externalhotkey=scrolllock
fanctrlovrd=enable
fanspeed=high
fastboot=minimal
hddacousticmode=bypass
keyboardclick=disable
keyboardillumination=off
keypad=enabledbyfnkey
lptmode=ps2
microphone=enable
modulebaydevice=enable
multicpucore=enable
multidisplay=enable
numlock=on
onboardmodem=enable
passwordbypass=off
pccardand1394=enable
pcibuscount=64
pntdevice=switchtotouchpad
posthelpdeskkey=disable
powerwarn=enable
81