Reference Guide

--valsetuppwd

Valid Argument <

password

Description Validates the setup password while setting a value in the BIOS. This is applicable only if

you set a setup password or both setup password and system password.

Example

C:\>cctk --numlock=enable --valsetuppwd=<password>

numlock=enable

--valsyspwd

Valid Argument <

password

Description Validates the system password while setting a value in the BIOS. This is applicable only if

you set a system password and did not set a setup password.

Example

C:\>cctk --numlock=enable --valsyspwd=<password>

numlock=enable

--vaphysicalpresenceconfirm

Valid Argument on, off

Description Sets the VA Physical Presence Confirmation. If set to off, it will allow VA install

application to make virtual appliance configuration changes without rebooting. If set to

on, it forces VA install application to reboot the system to make virtual appliance

configuration.

Example

C:\>cctk --vaphysicalpresenceconfirm=off

vaphysicalpresenceconfirm=off

--vgadacsnoop

Valid Argument enable, disable

Description Enables or disables the VGA DAC Snoop in BIOS.

Example

C:\>cctk --vgadacsnoop=enable

vgadacsnoop=enable

--videoexpansion

Valid Argument enable, disable

Description Enables or disables the video expansion.

Example

C:\>cctk --videoexpansion=enable

videoexpansion=enable