Reference Guide

--standbystate

Valid Argument s1, s3

Description Sets the system to ACPI S1 or S3 sleeping state when the systems enters standby mode.

Example

C:\>cctk --standby=s1

standby=s1

--stealthmode

Valid Argument enable, disable

Description Sets the operation mode of the system elements. If enabled, the system elements operate

in the pre-programmed stealth mode. If disabled, the system elements operate in the

normal mode.

Example

C:\>cctk --stealthmode=enable

stealthmode=enable

--strongpwd

Valid Argument enable, disable

Description Enables to enforce a strong password.

Example

C:\>cctk --strongpwd=enable

strongpwd=enable

--surroundview

Valid Argument enable, disable

Description Enables or disables SurroundView to use an additional AMD PCIE video card in

conjunction with the onboard graphics card that allows to use multiple monitors

concurrently. It is applicable only on the AMD platform.

Example

C:\>cctk --surroundview=enable

surroundview=enable

--svctag

Valid Argument Read-only

Description Reports the service tag for a system.

Example

C:\>cctk --svctag

svctag=113CD1S