Reference Guide

--scndidemaster

Valid Argument auto, off

Description Enables or disables secondary parallel IDE master channel.

Example

C:\>cctk --scndidemaster=on

scndidemaster=on

--scndideslave

Valid Argument auto, off

Description Sets the secondary parallel IDE master channel to off or auto.

Example

C:\>cctk --scndideslave=auto

scndideslave=auto

--scsi3

Valid Argument enable, disable

Description Enables or disables the third built-in SCSI controller.

Example

C:\>cctk --scsi3=enable

scsi3=enable

--secureboot

Valid Argument enable, disable

Description

Enables secure boot authentication.

NOTE: You cannot disable secure boot using the CCTK user interface. One of the

methods of disabling secureboot is from the BIOS setup screen.

Example

C:\>cctk --secureboot=enable

secureboot=enable

--serial1

Valid Argument disable, auto, com1, com2, com3, com4, com1_bmc, bmcserial, bmclan, rac

Description Defines the serial port 1 configuration.

Example

C:\>cctk --serial1=disable

serial1=disable