Reference Guide

--pcisata

Valid Argument enable, disable

Description Enables or disables the PCI Serial ATA controller.

Example

C:\>cctk --pcisata=enable

pcisata=enable

--pcislots

Valid Argument enable, disable

Description Enables or disables the add-in PCI slots of the system.

Example

C:\>cctk --pcislots=enable

pcislots=enable

--penmisindication

Valid Argument enable, disable

Description Enables or disables the missing pen indication. This property is used to control Tablet PC

pen removal. If the pen has been removed out of the retaining well, the pen LED will blink.

Example

C:\>cctk --penmisindication=enable

penmisindication=enable

--penresumeon

Valid Argument enable, disable

Description Enables or disables the resume on pen setting.

Example

C:\>cctk --penresumeon=disable

penresumeon=disable

--pntdevice

Valid Argument externalserialonly, externalps2only, switchtotouchpad, switchtoexternalps2

Description Sets the pointing device.

Example

C:\>cctk --pntdevice=externalserialonly

pntdevice=externalserialonly