Reference Guide

Example

C:\>cctk --fastboot=thorough

fastboot=thorough

--firstpowerondate

Valid Argument Read-only

Description Displays the date on which the system was first turned on.

Example

C:\>cctk --firstpowerondate

firstpowerondate=20100317

--flashcachemodule

Valid Argument enable, disable

Description Enables or disables the Ready Boost and Ready Cache functionality.

Example

C:\>cctk --flashcachemodule=disable

flashcachemodule=disable

--floppy

Valid Argument on, off, auto, readonly, usb

Description

Configures the floppy diskette controller.

• auto — Enables the auto-configuration of the built-in floppy controller of the

system.

• readonly — Floppy controller becomes read-only, no write operations are

permitted.

• usb — The built-in floppy controller is disabled but booting to a USB floppy is still

allowed.

Example

C:\>cctk --floppy=on

floppy=on

--forcepxeonnextboot

Valid Argument enable, disable

Description

Enables or disables Force PXE on next boot in BIOS.

If enabled, when the BIOS boots next time, the first PXE-capable device is inserted as the

first device in the boot sequence. Enabling this value causes this operation on the next

boot only, and does not cause a change in the defined boot sequence of the system. The

BIOS chooses the first PXE-capable device as the onboard network controller of the

system, if present and enabled, or the first bootable network device found in the standard

PCI search order of the system- whichever comes first.

If disabled, the boot override feature is disabled and the system boot sequence is in

effect.