Reference Guide

--diskettereconfig

Valid Argument anytime, atbootonly

Description Allows the user to hot or warm plug a floppy drive into the system and make it functional.

If set to atbootonly, the drive will be functional after the system is rebooted. If set to

anytime, reboot is not required.

Example

C:\>cctk --diskettereconfig=anytime

diskettereconfig=anytime

--displayclosestate

Valid Argument active, suspend

Description Sets the system to active or suspend state, when the system lid is closed.

Example

C:\>cctk --displayclosestate=active

displayclosestate=active

--dramprefetch

Valid Argument enable, disable

Description

Sets the DRAM to the following:

• disable — Disables DRAM references from triggering DRAM prefetch requests.

• enable — Enables DRAM references from triggering DRAM prefetch requests.

Example

C:\>cctk --dramprefetch=enable

dramprefetch=enable

--embideraid

Valid Argument enable, disable

Description Enables or disables the embedded IDE RAID controller.

Example

C:\>cctk --embideraid=enable

embideraid=enable

--embnic1

Valid Argument off, on, onnopxe, onwithiscsi, onwithrplboot, onwithimageserverboot

Description

Defines the state of the built-in NIC.

NOTE: Onwithimageserverboot is used in the deployment of Dell SmartClient

products.