Reference Guide

Example With Sub Options

With the --bootlisttype=uefi option, you can specify the following sub options: --

sequence , --enabledevice , and --disabledevice .

C:\>cctk bootorder --bootlisttype=uefi

--sequence=hdd.1,floppy --enabledevice=

cdrom,hdd.2

C:\>cctk bootorder --bootlisttype=uefi

--sequence=hdd.1,floppy --enabledevice=

cdrom,hdd.2 --valuesetuppwd=password

--disabledevice

Description Disables a device in the boot sequence. Use the device number or device short form as

the argument.

Example

C:\>cctk bootorder --disabledevice=embnic,hdd.1

C:\>cctk bootorder --disabledevice=1,3

Example With Sub Options

C:\>cctk bootorder --sequence=hdd.1,floppy

--enabledevice=cdrom,hdd.2 --disabledevice=

nic.1,hdd.3

--enabledevice

Description Enables a device in the boot sequence. Use the device number or device short form as

the argument.

Example

C:\>cctk bootorder --enabledevice=embnic,hdd.1

C:\>cctk bootorder --enabledevice=1,3

--sequence

Description Sets the bootorder based on the arguments provided. Use the device number or device

short form as the argument.

Example

C:\>cctk bootorder --sequence=embnic,hdd.1

C:\>cctk bootorder --sequence=1,3

Example for Unknown

Devices

C:\>cctk bootorder --sequence=x01.1,x01.2

--bootseqset

Valid Argument diskettefirst, harddiskonly, devlist, cdromfirst

Description

Sets the Initial Program Load (IPL) device sequence for the next system boot.

• diskettefirst — Sets the devices in the sequence: diskette, hard drive, CD- ROM,

and option ROMs (if available).