Reference Guide

notation. For example, if the system has an internal HDD, a USB storage device,

and a modular Bay HDD, the short forms will be displayed as hdd.1, hdd.2, and

hdd.3 respectively.

• device description — Description of the device.

Supported devices are:

• floppy — floppy disk

• usbfloppy — USB floppy disk

• hdd — hard disk

• cdrom — CD-ROM

• usbcdrom — USB CD-Rom

• pcmcia — PCMCIA device

• usbdev — USB device

• usbhdd — USB hard disk

• embnic — embedded NIC

• nic — NIC

• usbzip — USB ZIP

• usbdevzip — USB device ZIP

• bev — BEV device

NOTE: For legacy boot list, unknown devices are displayed as hexadecimal values.

For UEFI boot list, some of the devices are displayed as uefi with a <

number

notation. Change the bootorder by providing the short form of the unknown device.

NOTE: While changing the bootorder sequence, if the system is set with a setup

password, specify the setup password as the-- valsetuppwd argument. If the system

has a system password set and no setup password is set, specify the system

password as the -- valsyspwd argument.

Sub Options

The following are the sub options of bootorder.

--activebootlist

Description

Activates the boot list to UEFI or legacy. On reboot, the system boots based on the boot

list specified.

NOTE: With --activebootlist, do not specify any other sub options, such as --

sequence, --enabledevice, and --disabledevice.

Example

C:\>cctk bootorder --activebootlist=uefi

--bootlisttype

Description

Specifies the boot list as UEFI or legacy. If you want to run any bootorder options, such

as sequence, enabledevice, and so on, on the UEFI boot list, you must specify this sub

option with UEFI argument. The supported arguments are legacy and UEFI.

If --bootlisttype is not specified, running the bootorder sub options applies changes on

the legacy boot list.

Example

C:\>cctk bootorder --bootlisttype=uefi