Reference Guide

--agpaperturesize

Valid Argument 8M, 16M, 32M, 64M, 128M, 256M

Description

Sets the Accelerated Graphics Port (AGP) aperture size of Peripheral Component

Interconnect (PCI) address space.

NOTE: The Extended System Configuration Data (ESCD) must be cleared after the

aperture size is changed.

Example

C:\>cctk --agpaperturesize=8M

agpaperturesize=8M

--agpslot

Valid Argument enable, disable

Description Enables or disables on-board AGP slot.

Example

C:\>cctk --agpslot=enable

agpslot=enable

--alarmresume

Valid Argument enable, disable

Description

Allows or prevents the system to resume from the suspended mode.

• enable — System alarm resumes the system from the suspended mode.

• disable — System alarm prevents the system to resume from the suspend mode.

Example

C:\>cctk --alarmresume=enable

alarmresume=enable

--amblightsen

Valid Argument enable, disable

Description Enables or disables the ambient light sensor.

Example

C:\>cctk --amblightsen=enable

amblightsen=enable

--asfmode

Valid Argument

on, off, alertonly, dash

Description Sets the alert standard format. The alertonly argument enables only error messages. The

dash argument enables LOM to have both DASH and ASF 2.0 functionality.