Users Guide

4. Activate TPM. Type:

cctk --tpmactivation=activate --valsetuppwd=<BIOSpassword>

5. Reboot the system without interruption till the operating system loads.

6. Check the status of TPM. Type:

cctk --tpmactivation

The status is displayed as activate.

SCE Failing To Run On Windows Pre-Installation (Windows PE)

Environment

The SCE generated using the Export option on GUI is failing to run on Windows PE. To configure BIOS using SCE, on the

target systems running the Windows PE operating systems:

1. On a Windows system, extract the contents of SCE to a folder using the following option:

Sce.exe /e=<folder_path_to_extract_contents>

NOTE: For more information on using the command, use /h switch.

2. Copy the extracted contents to an accessible location in Windows PE system.

3. From the location of the extracted contents, run the following command to apply the configuration:

applyconfig.bat /logfile <A valid and existing folder with write permission>

\<A valid file name>

For example, applyconfig.bat /logfile C:\log.txt

To apply the configuration on a system, where setup or system password has been set, run the following

command: applyconfig.bat /logfile <A valid and existing folder with write

permission>\<A valid file name> "--valsetuppwd= <setup password>"

Example1: applyconfig.bat /logfile C:\log.txt "--valsetuppwd=dell"

Example 2: applyconfig.bat /logfile C:\log.txt "--valsyspwd=dell"

Contacting Dell

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice,

packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and

product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer

service issues:

1. Visit support.dell.com.

2. Select your support category.

3. If you are not a U.S. customer, select your country code at the bottom of the support.dell.com page, or select All to

see more choices.

4. Select the appropriate service or support link based on your need.