User's Manual

Using the BMC Management Utility 99
• lcd set vkvm: To set the vKVM status, Active or Inactive .
Command Syntax:
ipmitool -I lanplus -H <ipaddress> -U <user> -P
<password> -k <kgkey> delloem lcd set vkvm
{active}|{inactive}
• lcd set frontpanelaccess : Sets the LCD mode to view and
modify, view only, or disabled.
Command Syntax:
ipmitool -I lanplus -H <ipaddress> -U <user> -P
<password> -k <kgkey> delloem lcd set
frontpanelaccess{viewandmodify}|{viewonly}|
{disabled}
• lcd status : To view the vKVM status (Active or Inactive) and to view
the front panel access mode (View and Modify, View Only, or Disabled) on
the LCD.
Command Syntax:
ipmitool -I lanplus -H <ipaddress> -U <user> -P
<password> -k <kgkey> delloem lcd status
Options for powermonitor
• status : Displays the current power status of the system. The returned
values denote energy consumption, peak power (in Watts), and peak
amperage (in Amperes).
•
clear peakpower : Resets the peak power value.
•
clear cumulativepower : Resets the cumulative power values.
•
powersupplyrating : Gets the power rating for all the power supplies
attached in rated Watts.
Command Syntax:
ipmitool -I lanplus -H <ip-address> -U <user> -P
<password> -k <kgkey> delloem powermonitor
powersupplyrating