Users Guide

串行端口控制台重定向: Dell OpenManage 底板管理控制器公用程序 4.5 用户指南
file:///T|/htdocs/SOFTWARE/smbmcmu/BMCMU_4_5/cs/ug/bmcugadd.htm[10/26/2012 10:16:00 AM]
# networking) (网络）)
# 3 - Full multiuser mode (完全多用户模式)
# 4 - unused (未使用)
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this) (重新引导（请不要设置为 initdefault）)
#
id:3:initdefault:
# System initialization. (系统初始化。)
si::sysinit:/etc/rc.d/rc.sysinit
l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6
# Things to run in every runlevel. (每个运行级别要运行的内容。)
ud::once:/sbin/update
# Trap CTRL-ALT-DELETE (陷阱CTRL-ALT-DELETE)
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# When our UPS tells us power has failed, assume we have a few (当 UPS 提醒我们电源有故障时，请注意我们还有几)
# minutes of power left.Schedule a shutdown for 2 minutes from now. (分钟的电源剩余。请安排自现在 2 分钟后关
机。)
# This does, of course, assume you have power installed and your (这当然是基于您安装有电源而且您的)
# UPS is connected and working correctly. (UPS 连接和运作正常的前提下。)
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
# If power was restored before the shutdown kicked in, cancel it. (如果电源在关机前重又恢复，请取消它。)
pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
# Run gettys in standard runlevels (在标准运行级别运行gettys)
co:2345:respawn:/sbin/agetty -h -L 19200 ttyS0 vt100
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6
# Run xdm in runlevel 5 (在运行级别 5 运行 xdm)
# xdm is now a separate service (xdm 当前为独立服务)
x:5:respawn:/etc/X11/prefdm -nodaemon
按照以下说明编辑文件 /etc/securetty：
添加新行，为 COM1 使用串行 tty 名称：
ttyS0
请参阅示例文件，其中显示添加的新行。
表 8-3. 示例文件：/etc/securetty
vc/1
vc/2
vc/3
vc/4
vc/5
vc/6
vc/7
vc/8
vc/9
vc/10
vc/11
tty1
tty2
tty3
tty4
tty5
tty6
tty7
tty8
tty9
tty10
tty11
ttyS0