User's Manual

Configuring Your Managed System 39
NOTE: If the first integrated network interface controller (NIC 1) is used in an Ether
Channel team or link aggregation team, the BMC management traffic will not
function on PowerEdge x8xx systems. The NIC teaming option is supported on
PowerEdge x9xx, xx0x, and xx1x systems. For more information about network
teaming, see the documentation for the network interface controller.
Account Access Enables or disables account privileges.
Account Privilege Sets the account to:
Admin, User, Operator, or No Access
Account User Name Sets the account user name.
Enter Password Enter the password for this Account User. You must enter at
least one non-null character.
Confirm Password Confirm the password you entered.
Reset To Default Clears the BMC settings and resets the BMC setting to the
defaults.
CAUTION: Resetting to factory defaults will restore
remote non-volatile settings.
System Event Log
Menu
Enables viewing and clearing the System Event Log (SEL).
A popup box will indicate that the SEL is being read.
Total System Event
Log Entries
Displays the number of records in the SEL.
View System Event Log Displays a record in the SEL, starting with the most recent
record. Enter a record number to view, using the Advance
to Entry field. Use the Right and Left arrow keys to scroll
up and down the SEL.
Clear System Event Log Erases all records in the SEL.
Table 2-1. Remote Access Configuration Utility in
x9xx systems (continued)
Option Description