User's Manual

Using the BMC Management Utility 97
To facilitate command scripting, upon successful execution, IPMItool
terminates with an exit code of zero, and will output the execution results in
a parsable format. If an error is encountered, the program exits with a non-
zero error code and outputs the error in a parsable format. See "BMC
Management Utility Error Codes" on page 113 for a complete list of possible
BMC Management Utility error codes.
The complete list of commands listed under delloem in Table 3-2 are
supported by the IPMItool.
delloem
The delloem commands provide information on Dell-specific features.
Table 3-2 lists the delloem subcommands with a brief description.
NOTE: The vFlash info Card command can be used only for in-band access.
Options for LCD
• lcd set {mode}|{lcdquallifier}|{errordisplay}
• lcd set mode : Allows you to set the LCD mode and user defined
string.
Table 3-2. delloem Subcommands
Command Description
lcd
Displays information on and helps configure the LCD
panel in
Dell x9xx, xx0x, and xx1x systems.
powermonitor
Displays power tracking statistics information.
sysinfo
Displays information about your system.
sel
Displays the system event log information.
sensor
Displays information on and helps manage your
system’s sensors.
mac
Displays information about the system NICs.
lan
Displays the NIC selection mode information.
windbg
Controls the debugging sessions.
vFlash info
Card
Displays the vFlash SD card properties.