User's Manual

42 Configuring Your Managed System
NOTE: For your reference, a sample winpeoem.sif file is available under
\Dell\Toolkit\template\Configs.
4 Starting required services: The mr2kserv service should be installed and
started for RAID to function; the
racsvc service should be installed and
started for RACADM to function. For details on how to start the required
services, see the sample
winbom.ini file under
\Dell\Toolkit\template\Configs .
NOTE: When booting the target system, ensure that the RAC and the
mr2kserv services are running.
5 Extracting the following files from your Windows Server 2003 product CD
to
\Dell\Toolkit\Tools :
•rpcns4.dll
•rpcrt4.dll
• rpcss.dll
NOTE: The directory name should not have any spaces.
You can now customize the Windows PE according to your requirements.
Creating a Bootable CD
Use the following steps to create bootable media that can be used to
configure the BMC on a managed system:
1
Create a directory, WinPE_OPKTools , on your hard drive.
2 Insert the Windows OEM Preinstallation Kit (OPK) CD into your CD
drive.
3 Copy all CD files from the Windows PE directory to the
WinPE_OPKTools directory.
4 Copy factory.exe and netcfg.exe from the CD drive \tools\x86 directory to
the
WinPE_OPKTools directory.
5 Remove the CD from the CD drive.
6 Create and name a directory on your development system hard drive.
This is where the ISO file is stored.
7 Navigate to the WinPE_OPKTools directory through a command prompt.
8 Run the following command:
OSCDIMG -bETFSBOOT.COM -n <DELLWINPEBUILD>