User's Manual

Configuring Your Managed System 37
LAN Speed Setting This field is read-only when Auto-Negotiate is set to
Enabled.
Sets the LAN Speed Setting to 10 or 100 Mbps
LAN Duplex Setting This field is read-only when Auto-Negotiate is set to
Enabled.
Sets the LAN communication method to Half or Full
Duplex.
DNS Configuration Options
DNS Servers from
DHCP
on = IP addresses of the DNS Servers are assigned by the
DHCP
off = IP addresses of the DNS Servers are set manually
DNS Server 1 This field is read-only when DNS Servers from DHCP is
set to on.
Enter the IP Address of DNS Server 1
The following IPv4 rules apply:
• IP addresses cannot be 127.xxx.xxx.xxx , where xxx is
between
0-255 .
• The first octet must be between
1-223 (i.e.
143.xxx.xxx.xxx )
• The last octet must not be
0 or 255
(i.e.
xxx.xxx.xxx.0 or xxx.xxx.xxx.255 )
DNS Server 2 This field is read-only when DNS Servers from DHCP is
set to on.
Enter the IP Address of DNS Server 2
The following IPv4 rules apply:
• IP addresses cannot be 127.xxx.xxx.xxx , where xxx is
between
0-255 .
• The first octet must be between
1-223 (i.e.
143.xxx.xxx.xxx )
• The last octet must not be
0 or 255
(i.e.
xxx.xxx.xxx.0 or xxx.xxx.xxx.255 )
Register RAC Name on = You may enter the Current DNS RAC Name.
Table 2-1. Remote Access Configuration Utility in
x9xx systems (continued)
Option Description