User's Manual

Using the BMC Management Utility 95
status—Displays the current power status of the system. The returned
values denote energy consumption, peak power (in Watts), and peak
amperage.
clear peakpower—Resets the peak power value.
clear cumulativepower—Resets the cumulative power values.
Default Subcommand
If a subcommand is not specified, this command functions the same as
powermonitor status.
Options for sysinfo
This command returns both FRU and BMC related information for your
system.
Options for sel
• info — Displays information about and the contents of the system
event log.
•
clear — Deletes all records in the event log.
•
list — Displays all contents of the event log.
•
<count> |first <count> — Displays the first < count > (oldest)
entries in the SEL. If the count is zero, all entries are displayed.
•
last <count> — Displays the last < count > (most recent) entries in
the SEL. If the count is zero, all entries are displayed.
•
time — Displays the most recent entries in the SEL. If the count is zero,
all entries are displayed. You can use the
get command to display the
system event log’s current time. The
set < time string > option
allows you to set the system event log’s time. Future event log entries will
use the time set by this command.
< time string > is in the form
<
MM/DD/YYYY HH:MM:SS >.
NOTE: Hours are in 24-hour form. It is recommended that the event log be cleared
before setting the time.
NOTE: Time values between delloem sel time and sel time differ but
the
delloem sel time command returns the correct value for Dell systems.