User's Manual

Configuring Your Managed System 35
DNS Server 2 This field is read-only when DNS Servers from
DHCP is set to on.
Enter the IP Address of DNS Server 2
The following IPv4 rules apply:
• IP addresses cannot be 127.xxx.xxx.xxx , where xxx is
between
0-255 .
• The first octet must be between
1-223 (i.e.
143.xxx.xxx.xxx )
• The last octet must not be
0 or 255
(i.e.
xxx.xxx.xxx.0 or xxx.xxx.xxx.255 )
Register RAC Name on = You may enter the Current DNS RAC Name.
Register RAC Name This field is read-only when Register RAC Name is
set to off.
Enter the Current DNS RAC Name using 1-32 alpha-
numerics, spaces, and symbols. Press <Enter> to save
the value. Press <Esc> to exit the field without saving.
Domain Name from DHCP Turns the domain name on or off.
Domain Name This field is read-only when DNS Servers from
DHCP is set to on.
Enter the Domain Name using 1-64 alpha-numerics,
spaces, and symbols. Press <Enter> to save the value.
Press <Esc> to exit the field without saving.
Virtual Media
Configuration
NOTE: This option is available only on systems with a
DRAC installed.
Virtual Media Attaches or detaches a virtual media drive.
Virtual Flash Enables or disables virtual flash memory.
LAN User Configuration Enables setting the user name, user password, user
privilege, and enables user access for user ID=2.
Account Access Enables or disables account privileges.
Account Privilege Sets the account to:
Admin, User, Operator, or No Access
Account User Name Sets the account user name.
Table 2-1. Remote Access Configuration Utility (continued)
Option Description