User's Manual

30 Configuring Your Managed System
Figure 2-1. Remote Access Configuration Utility
Entering the Remote Access Configuration Utility
1 Turn on or restart your system.
2 Press < Ctrl-E > when prompted after POST.
If your operating system begins to load before you press <
Crtl-E >,
allow the system to finish booting, and then restart your system and try
again.
Remote Access Configuration Utility Options
Table 2-1 lists the Remote Access Configuration Utility options and shows
how to configure the BMC on a managed system. After entering all settings,
press <Esc> and select one of the following:
• Save Changes and Exit— Keep all entries made in the Remote Access
Configuration Utility.
•
Discard Changes and Exit —Undo all entries made in the Remote Access
Configuration Utility.
•
Return to Setup —Continue using the Remote Access Configuration Utility.