User's Manual

Terminal Mode Commands 119
SYS
HEALTH
QUERY
Causes the BMC to return a high level version of the
system health status in terse format. The BMC returns
a string with the following format if the command is
accepted.
PWR:zzz H:xx T:xx V:xx PS:xx C:xx D:xx
S:xx O:xx
Where:
PWR is system POWER state.
H is overall Health.
T is Temperature.
V is Voltage.
PS is Power Supply subsystem.
C is cooling subsystem (Fans).
D is Hard Drive/RAID Subsystem.
S is physical Security.
O is Other (OEM).
zzz is: ON, OFF (soft-off or mechanical off), SLP
(sleep - used when sleep level cannot be
distinguished), S4, S3, S2, S1, ?? (unknown).
and xx is: ok, nc, cr, nr, uf, or ?? where:
ok = OK (monitored parameters within normal
operating ranges).
nc = non-critical ("warning": hardware
outside normal operating range).
cr = critical ("fatal": hardware exceeding
specified ratings).
nr = non-recoverable ("potential damage":
system hardware in jeopardy or damaged).
uf = unspecified fault (fault detected, but severity
unspecified).
?? = status not available/unknown (typically because
system power is OFF).
Table B-3. Terminal Mode Text Commands (continued)
Command Switches Description