User's Manual

118 Terminal Mode Commands
SYS SET
TCFG
Returns the Terminal Mode Configuration bytes
where XX and YY represent hex-ASCII encoding for
the volatile version of data bytes 1 and 2 as specified in
Table B-4, and AA BB represent hex-ASCII encoding
of the non-volatile version.
V:XX <output termination sequence>
N:AA BB <output termination sequence>
-V XX YY Sets the volatile Terminal Mode Configuration. XX
and YY represent hex-ASCII encoding for data bytes 1
and 2 as specified in Table B-4. The BMC returns the
same output as for SYS SET TCFG, above.
-N XX YY Sets the non-volatile Terminal Mode Configuration.
XX and YY represent hex-ASCII encoding for data
bytes 1 and 2 as specified in Table B-4. The BMC
returns the same output as for SYS SET TCFG, above.
SYS RESET Directs the BMC to perform an immediate system
hard reset.
SYS POWER
OFF
Directs the BMC to perform an immediate system
power off.
SYS POWER
ON
Causes the BMC to initiate an immediate system
power on.
Table B-3. Terminal Mode Text Commands (continued)
Command Switches Description