Users Guide

Terminal Mode Commands 83
SYS SET TCFG Returns the Terminal Mode Configuration bytes where XX and YY
represent hex-ASCII encoding for the volatile version of data bytes
1 and 2 as specified in Table B-4, and AA BB represent hex-ASCII
encoding of the non-volatile version.
V:XX <output termination sequence>
N:AA BB <output termination sequence>
-V XX YY Sets the volatile Terminal Mode Configuration. XX and YY
represent hex-ASCII encoding for data bytes 1 and 2 as specified in
Table B-4. The BMC returns the same output as for SYS SET
TCFG, above.
-N XX YY Sets the non-volatile Terminal Mode Configuration. XX and YY
represent hex-ASCII encoding for data bytes 1 and 2 as specified in
Table B-4. The BMC returns the same output as for SYS SET
TCFG, above.
SYS RESET Directs the BMC to perform an immediate system hard reset.
SYS POWER
OFF
Directs the BMC to perform an immediate system power off.
SYS POWER ON Causes the BMC to initiate an immediate system power on.
Table B-3. Terminal Mode Text Commands (continued)
Command Switches Description