Users Guide

68 Using the BMC Management Utility
Sdr Cache
Specifies whether the system probe information is saved. This information enhances speed of
providing sensor and System Event Log (SEL) data. The possible values are on and off. Default value is
on. For example,
sdr_cache=on
Sdrcache Path
Specifies path where the system probe information is saved. Default location is the installed
BMC directory on your hard drive. For example,
sdrcache_path=<specified path directory>
Max Session
Specifies the maximum number of concurrent SOL sessions possible. This default value is 1; any value
less than 1 will be ignored or treated as 1. You cannot set more than 20 sessions. For example,
max_session=2
Logpath
Specifies the path for storing the log files. Two log files, solproxy.log and solproxyipmi.log, are created at
the specified path. For example,
logpath=<specified location for log file>
debug
Specifies if the debug data will be logged. The default is off.
debug=off