Users Guide

Using the BMC Management Utility 61
Figure 3-18. Configuring the Serial-Over-LAN for the Remote System, Example 2
• If SOL is enabled, two BMC settings are displayed:
– The communication baud-rate between the system serial port and the BMC
– The minimum BMC user privilege level required for activating console redirection
SOL Proxy displays a list of valid values for each feature, as well as the current value of the feature
enclosed in a pair of brackets. Select the number before a value to set it as the new setting, and press
<Enter> to confirm your changes. The new SOL settings are then displayed. See Figure 3-19.