Users Guide

70 Terminal Mode Commands
www.dell.com | support.dell.com
SYS HEALTH
QUERY
-V Causes the BMC to return a high level version of the system health
status in multi-line "verbose" format. The BMC returns a string of
the following format:
SYS Health:xx<output termination sequence>.
Power: ON, OFF (soft-off or mechanical off), SLEEP (sleep - used
when can't distinguish sleep level), S4, S3, S2, S1, Unknown.
Temperature:xx<output termination sequence>.
Voltage:xx<output termination sequence>.
PowerSystem:xx<output termination sequence>.
Cooling:xx<output termination sequence>.
Drives:xx<output termination sequence>.
Security:xx<output termination sequence>.
Other:xx<output termination sequence>.
Where xx is:
OK (monitored parameters within normal operating ranges).
Non-critical ("warning": hardware outside normal operating
range).
Critical ("fatal" :hardware exceeding specified ratings).
Non-recoverable ("potential damage": system hardware in jeopardy
or damaged).
Unspecified fault (fault detected, but severity unspecified).
Unknown (status not available/unknown (typically because system
power is OFF).
Table B-3. Terminal Mode Text Commands (continued)
Command Switches Description