Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Baseboard Management Controller Version 1.2 with Dell OpenManage 4.5.1
41424344454647484950
48 Using the BMC Management Utility
www.dell.com | support.dell.com
Figure 3-13. Configuring the Serial-Over-LAN for the Remote System, Example 2
• If SOL is enabled, two BMC settings are displayed:
– The communication baud-rate between the system serial port and the BMC
– The minimum BMC user privilege level required for activating console redirection
SOL Proxy displays a list of valid values for each feature, as well as the current value of the
feature enclosed in a pair of brackets. Select the number before a value to set it as the new
setting, and press <Enter> to confirm your changes. The new BMC settings are then
displayed. See Figure 3-14.