Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Baseboard Management Controller Version 1.2 with Dell OpenManage 4.5.1
41424344454647484950
46 Using the BMC Management Utility
www.dell.com | support.dell.com
Figure 3-11. Connecting to the Remote System’s BMC
Configuring the SOL for the Remote Managed System
Select option
2
in the main menu.
NOTE: You must be connected to the managed system’s BMC before you can configure the SOL
features. If SOL Proxy is not yet connected to the managed system’s BMC, you are prompted for an IP
address and a username/password combination. See "Connecting to the Remote Managed System’s
BMC" for more information.
The SOL configuration menu appears. According to the current SOL status, the content of the
SOL configuration menu varies:
• If SOL is already enabled, the current settings are displayed and you are presented with three
choices. See Figure 3-12.