Users Guide

36 Supported Devices
NOTE: Online Diagnostics enumerates and displays the diagnostic tests for
the hard drives that are connected to SAS 5/iR (Adapter and Integrated), SAS 5/i
Integrated, and SAS 6/iR, S100, S110, S300, H200 (Adapter, Integrated, and Modular)
controllers. However, diagnostic tests for these controllers themselves are
unavailable.
NOTE: For a list of firmware requirements for each controller, see Diagnostic
Dependencies for Supported RAID Controllers .
NOTE: For more information on controller-specific tests (for example, the Battery
test for PERC 4e/DC, PERC 5/i, PERC 6/i, PERC H700, and PERC H800), see the online
Help.
For the list of devices supported by Online Diagnostics, see Dell Online
Diagnostics Version 2.30 Readme.
Diagnostics Supported on Systems Running Windows Operating
System, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and
VMware ESX
On systems running Windows operating systems, Red Hat Enterprise Linux,
SUSE Linux Enterprise Server, and VMware ESX, Online Diagnostics
supports diagnostics for a number of controllers and the hard drives that are
attached to these controllers.
For a complete list of the controllers supported by Online Diagnostics, see the
Dell Online Diagnostics Version 2.30 Readme available at dell.com/
serviceabilitytools.
NOTE: Windows Server 2008 and later does not support PERC 320/DC controllers.
NOTE: The CERC ATA 100 4/CH is not supported on Linux operating systems. It is
supported only on Windows operating systems.
NOTE: The SAS 5/E Adapter and SAS 6Gbps HBA support diagnostics test only on
connected tape drives.
Diagnostic Dependencies for Supported
RAID Controllers
Dell Online Diagnostics requires Dell-qualified device drivers and firmware
to run diagnostic tests on RAID controllers, SCSI controllers, and attached
hard drives.