Reference Guide

Version Description
6.1.1.1 Introduced on the E-Series.
Related
Commands
show ip ospf asbr — displays the VLAN configuration.
distance
Define an administrative distance for particular routes to a specific IP address.
Z9500
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-list-name]
command.
Parameters
weight Specify an administrative distance. The range is from 1 to 255. The default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If you enter a router
ID, include the mask for that router address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.
Defaults 110
Command Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
distance ospf
Configure an OSPF distance metric for different types of routes.
Z9500
Syntax
distance ospf [external dist3] [inter-area dist2] [intra-area dist1]
To delete these settings, use the no distance ospf command.
Open Shortest Path First (OSPFv2 and OSPFv3) 951