Reference Guide

Multiple Spanning Tree Protocol (MSTP)
Multiple spanning tree protocol (MSTP), as implemented by the Dell Networking operating system, conforms to IEEE 802.1s.
Topics:
• debug spanning-tree mstp
• disable
• forward-delay
• hello-time
• max-age
• max-hops
• msti
• name
• protocol spanning-tree mstp
• revision
• show config
• show spanning-tree mst configuration
• show spanning-tree msti
• spanning-tree
• spanning-tree msti
• spanning-tree mstp edge-port
• tc-flush-standard
debug spanning-tree mstp
Enable debugging of the multiple spanning tree protocol and view information on the protocol.
Z9500
Syntax
debug spanning-tree mstp [all | bpdu interface {in | out} | events]
To disable debugging, enter no debug spanning-tree mstp
Parameters
all (OPTIONAL) Enter the keyword all to debug all spanning tree operations.
bpdu interface
{in | out}
(OPTIONAL) Enter the keyword bpdu to debug bridge protocol data units (BPDU).
(OPTIONAL) Enter the interface keyword along with the type slot/port of the
interface you want displayed. Type slot/port options are the following:
● For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 512.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Optionally, enter an in or out parameter with the optional interface:
● For Receive, enter the keyword in.
● For Transmit, enter the keyword out.
events (OPTIONAL) Enter the keyword events to debug MSTP events.
34
Multiple Spanning Tree Protocol (MSTP) 927