Reference Guide

Total Number of Routes in the CAM is 1
Total Number of Routes which can be entered in CAM is 155647
IPC Messages Received from RTM 158
[Add route requests 0; Delete Route requests 0]
[Clear Route requests 0]
IPC Messages Received from NDPM 0
Section Current Use
------------------------
128 0
127 0
126 0
125 0
124 0
123 0
122 0
121 0
120 0
119 0
118 0
117 0
116 0
--More--
show ipv6 flowlabel-zero
Display the flow label zero setting.
Z9500
Syntax
show ipv6 flowlabel-zero
Default Disabled
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 nd dad attempts — Configure system to set the flow label field in the packets to zero.
IPv6 Basics 777