Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 flowlabel-zero — Configure IPv6 address auto-configuration for the management interface.
show ipv6 fib linecard
View all FIB entries.
Z9500
Syntax
show ipv6 fib [vrf vrf-name]linecard slot-id [summary | ipv6-address]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to clear the
neighbor corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are cleared.
linecard slot-id Enter the slot ID of the line card. The range of Z9500 slot IDs is from 0 to 2.
summary (OPTIONAL) Enter the keyword summary to view a summary of entries in IPv6
cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have
more specific prefixes. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Usage
Information
Host tables are not stored in CAM tables on S-Series platforms. Entries for camIndex displays as zero
(0) on the show ipv6 fib linecard output for neighbor entries, such as address resolution protocol
(ARP) entries.
Example
Dell# show ipv6 fib linecard 0 summary
Total Number of Routes in the FIB database is 0
776 IPv6 Basics