Reference Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.11.4 Introduced on the Z9000.
hash-algorithm hg-seed
Select the seed value used in HiGig hashing.
Z9500
Syntax
[no] hash-algorithm hg-seed number [linecard slot-id port-set port-pipe]
Parameters
hg-seed number Enter the keywords hg-seed then the hash algorithm seed value. The range is
from 0 to 2147483646.
linecard slot-id
port-set port-
pipe
(Optional) Enter the line-card slot ID and port-pipe number for the set of ports for
which you configure HiGig hashing. The range of Z9500 slot IDs is 0 to 2. The
range of port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and 2.
Defaults 32-bit chassis MAC and system time
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.11.4 Introduced on the Z9000.
hash-algorithm seed
Select the seed value for the ECMP, LAG, and NH hashing algorithm.
Z9500
Syntax
hash-algorithm seed value [linecard slot] [port-set number]
Parameters
seed value Enter the keyword seed then the seed value. The range is from 0 to 4095.
linecard slot Enter the keyword linecard then the linecard slot number.
port-set number Enter the keyword port-set then the linecard port-pipe number.
Defaults none
Command Modes CONFIGURATION
556 Equal Cost Multi-Path (ECMP)