Reference Guide
● crc32LSB: Use CRC32_LOWER — LSB 16 bits of computed CRC32
● xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor1
● xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor2
● xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor4
● xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor8
● xor16: Use CR16 — 16 bit XOR
hg-seed
seed-
value
Enter the keywords hg-seed then the hash algorithm seed value. The range is
from 0 to 2147483646.
lag {
crc16
|
crc16cc
|
crc32MSB
|
crc32LSB
|
xor1
|
xor2
|
xor4
|
xor8
|
xor16
}
Enter the keyword lag then one of the following options:
● crc16: Use CRC16_BISYNC — 16 bit CRC16-bisync polynomial (default)
● crc16cc: Use CRC16_CCITT — 16 bit CRC16 using CRC16-CCITT polynomial
● crc32MSB: Use CRC32_UPPER — MSB 16 bits of computed CRC32
● crc32LSB: Use CRC32_LOWER — LSB 16 bits of computed CRC32
● xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor1
● xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor2
● xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor4
● xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor8
● xor16: Use CR16 — 16 bit XOR
seed
seed-value
Enter the keyword seed then the hash algorithm seed value. The range is from 0
to 2147483646.
linecard
slot-id
|
port-set
port-
pipe
Enter the linecard slot-id parameters to specify a Z9500 line card. The slot
IDs range from 0 to 2.
Enter the port-set port-pipe parametrs to specify a port pipe (set of ports)
on the line card. The port-pipe range is from 0 to 3.
Defaults IPSA and IPDA mask value is FF for the line card.
Command Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Added the nh-ecmp option.
7.7.1.1 Added the nh-ecmp option.
6.5.1.0 Added the line card option on TeraScale only.
6.3.1.0 Added support for ECMP and LAG on TeraScale only.
Equal Cost Multi-Path (ECMP) 553