Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
Usage
Information
Use this command to include the vendor-class identifier (option 60) in DHCP packets sent by the client.
This option is used by DHCP clients to identify the vendor type and configuration of a DHCP client. The
vendor-class identifier includes hardware-related information that identifies the switch and includes a
user-configurable text string .
You can enter the ip address dhcp relay information-option and ip address dhcp
relay vendor-class-identfier commands in the same ip address dhcp command line; for
example:
ip address dhcp vendor-class-identifier dell9500 relay information-option
mac
ip address dhcp relay information-option mac vendor-class-identifier
dell9500
Related
Commands
ip address dhcp — configures an interface to receive its IP address from the configured DHCP server.
lease
Specify a lease time for the addresses in a pool.
Z9500
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
days Enter the number of days of the lease. The range is from 0 to 31.
hours Enter the number of hours of the lease. The range is from 0 to 23.
minutes Enter the number of minutes of the lease. The range is from 0 to 59.
infinite Specify that the lease never expires.
Defaults 24 hours
Command Modes DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
528 Dynamic Host Configuration Protocol (DHCP)