Reference Guide

MASK=0x000000000000000000000000000000000000000000000000000003ffc0003ffc
Stage
--More--
show hardware vlan-counters
Display the hardware VLAN statistics.
Syntax
show hardware vlan-counters vlan-id
Parameters
vlan-id Enter the interface VLAN number. The range is from 1 to 4094.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced this command.
Example
Dell#show hardware vlan-counters 1
Counters for vlanid: 1
------------------------
Total number of inpackets: 0
Total number of inbytes: 0
Total number of outpackets: 0
Total number of outbytes: 0
Dell#
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware components.
tcpdump
Enable a TCP dump for CPU-bound traffic on the Control and Router Processors..
Z9500
Syntax
tcpdump {cp | rp} [capture-duration time | filter expression | max-file-
count value | packet-count value | snap-length value | write-to path]
To disable the TCP dump, use the no tcpdump command.
Parameters
cp Enter the keyword cp to perform a dump on traffic processed by the Control
Processor CPU.
rp Enter the keyword rp to perform a dump on traffic processed by the Route
Processor CPU.
capture-duration Enter the time for packet capturing. The timer begins as soon as the command is
enabled. The range is 20 to 9000 seconds.
516 Debugging and Diagnostics