Reference Guide

IpType
Offset: 192 Width: 4
DATA=0x00000000
MASK=0x0000000e
L3Routable
Offset: 156 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 185 Width: 7
DATA=0x00000005
MASK=0x0000007f
action={act=DropCancel, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 110 slice = 2 idx=4 entries=1}{Packets}
EID 0x00001101: gid=0xf,
slice=2, slice_idx=0x2, part =0 prio=0x1101, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
IpFrag
Offset: 7 Width: 2
DATA=0x00000000
MASK=0x00000001
IpType
Offset: 192 Width: 4
DATA=0x00000000
MASK=0x0000000e
L3Routable
Offset: 156 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 185 Width: 7
DATA=0x00000005
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 111 slice = 2 idx=4 entries=1}{Packets}
show hardware system-flow
Display Layer 3 ACL or QoS data for traffic flows on the central switch (aggregated CoPP) or a specified line card and port
pipe.
Z9500
Syntax
show hardware system-flow layer2 [cp-switch | linecard slot-id port-set
port-pipe]
Parameters
cp-switch Enter the keyword cp-switch to display information on system flows of control-
plane traffic.
linecard slot-id
portset port-pipe
Enter the slot ID and port pipe to display information on system flows on a
specified Z9500 line card and port set. The range of Z9500 slot IDs is from 0 to 2.
The range of port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and
2.
Defaults none
Command Modes EXEC Privilege
Debugging and Diagnostics 513