Reference Guide

Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to display ingress or
egress ACL data.
linecard slot-id Enter the linecard slot-id parameters to specify a Z9500 line card. The
range of slot IDs is from 0 to 2.
port-set number Enter the keywords port-set number parameters to specify a port pipe (set of
ports) on a line card. The range of port-set numbers is from 0 to 3.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Usage
Information
The port-set values are internal port numbers. For a cross reference of the internal and port numbers,
refer to the Debugging and Diagnostics chapter in the Dell Networking OS Configuration Guide for the
Z9500 System.
Example
Dell#show hardware layer2 acl eg-acl linecard 2 port-set 0
EID 0x000010ce: gid=0x10,
slice=3, slice_idx=0, part =0 prio=0x10ce, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
Color
Offset: 22 Width: 2
DATA=0x00000001
MASK=0x00000003
action={act=RpDrop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 62 slice = 3 idx=0 entries=1}{Packets}
EID 0x000010cd: gid=0x10,
slice=3, slice_idx=0x1, part =0 prio=0x10cd, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
OutPort
Offset: 193 Width: 7
DATA=0x00000000
MASK=0x0000007f
action={act=RpDrop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 63 slice = 3 idx=0 entries=1}{Packets}
EID 0x000010cc: gid=0x10,
slice=3, slice_idx=0x2, part =0 prio=0x10cc, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
DstMac
Offset: 90 Width: 48
DATA=0x00000180 c2000000
MASK=0x0000ffff ff000000
Debugging and Diagnostics
511