Reference Guide

○ ipmc-replication: Displays the multicast IPMC replication table from
the bShell.
○ port-stats: Displays the internal statistics on a per-port basis.
○ register: Displays the line-card internal registers.
○ table-dump: Displays the tables from the bShell.
● bp-link-map: Displays the backplane links (between leaf/port and spine/
fabric) on a specified line card.
● bp-link-state: Displays the status of the backplane links on a specified line
card.
● hg-stats unit unit-num port port-num: Displays input and output
statistics for a HiGig port (NPU port number) on a specified line card.
party-bus Enter the keyword party-bus with a command option to display hardware
statistics from the party bus that links Z9500 CPUs. The command options are:
● port port-num statistics: Displays statistics on a specified party-bus
internal port.
● port all: Displays statistics on all party-bus internal ports.
rp Enter the keyword rp with a command option to display hardware statistics from
the Route Processor. The command options are:
● cpu data-plane statistics: Displays data-plane statistics, including the
HiGig port statistics with input/output counters to which the stacking module is
connected.
● cpu i2c statistics: Displays active i2c-address statistics.
● cpu management statistics: Displays management port counters.
● cpu sata-interface statistics: Displays sata-interface error counter
statistics.
sfm sfm-unit-
num
Enter the keyword sfm with an Switch Fabric Module (SFM) unit number and a
command option to display hardware statistics from the specified SFM on the
Z9500. The range of SFM unit numbers is from 0 to 5. The command options are:
● buffer {total-buffer | unit unit-num {port port-num |
total-buffer}: Displays buffer statistics from the total SFM buffer or from
a specified SFM unit. The range of SFM unit ID numbers is from 0 to 5. The
range of SFM unit ports is from 1 to 128.
● counters: Displays the counters for SFM traffic to troubleshoot an error
condition.
● details: Displays more detailed information on control-plane and protocol
control packet statistics.
● drops: Displays the number of internal drops on the specified SFM unit.
● port-stats: Displays status about why an SFM port is not brought up to
register level.
● register: Displays the internal registers for each switch fabric.
● table-dump: Displays the tables from the bShell.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
Debugging and Diagnostics 499