Reference Guide

Version Description
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
clear hardware system-flow
Clear system-flow statistics from a specified line card.
Z9500
Syntax
clear hardware system-flow layer2 linecard slot-id port-set port-pipe
counters
Parameters
linecard slot-id Enter the linecard slot-id parameters to identify the Z9500 line card on
which you want to clear system-flow statistics. The range of slot IDs is from 0 to 2.
port-set port-
pipe counters
Enter the keywords port-set along with a port-pipe number, then the keyword
counters to clear the system-flow counters on the selected port-pipe. The range of
port-pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line cards 1 and 2.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware — displays the data plane or management plane input and output statistics for a specified
hardware component.
clear hardware vlan-counters
Clear VLAN statistics.
Syntax
clear hardware vlan-couters vlan-id
Parameters
vlan-id Enter the interface VLAN number. The range is from 1 to 4094.
Defaults none
Command Modes EXEC Privilege
Debugging and Diagnostics 495