Reference Guide

show linecard port-set backplane all
Displays the PFC buffer threshold assigned to a QoS policy.
Syntax
show linecard <0-2/all> port-set <0-3/all> backplane all [pfc buffer-threshold |
details | statistics] | [ ets details]
Parameters
detail
Enter the keyword detail for a full list of results.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
Example
Example of show linecard 0 port-set 0 backplane all pfc buffer-threshold output
Dell#show linecard 0 port-set 0 backplane all pfc buffer-threshold
linecard 0 port-set 0 backplane all
Queue# Lossless Buffer-size Pause-threshold Resume-offset Shared Threshold
(KB) (KB) (KB) Weight
----------------------------------------------------------------------------------
0 NO - - - -
1 NO - - - -
2 NO - - - -
3 YES 130 36 18 11
4 NO - - - -
5 NO - - - -
6 NO - - - -
7 NO - - - -
Example of show linecard 2 port-set 0 backplane all pfc detailsoutput
Dell#show linecard 2 port-set 0 backplane all pfc details
linecard 2 port-set 0 backplane all
Admin mode is On
Admin is enabled, Priority list is 3
Local is enabled, Priority list is 3
Link Delay 65535 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
Example of show linecard 2 port-set 0 backplane all pfc statisticsoutput
Dell#sh linecard 2 port-set 0 backplane all pfc statistics
linecard 2 port-set 0 backplane port 0
Priority Rx XOFF Frames Rx Total Frames Tx Total Frames
-------------------------------------------------------------------------------
0 0 0 0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
Data Center Bridging (DCB)
467