Reference Guide

Q11 1800 1000
Q12 2000 6000
Q13 5200 3000
Q14 1850 3000
Q15 12450 4000
Q16 1 100
Q17 1 100
Q18 1 100
Q19 1 100
Q20 600 1000
Q21 7000 7000
Q22 800 1000
Q23 5000 5000
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
show ip protocol-queue-mapping
Display the Z9500 CPU queue mapping for IPv4 protocols.
Z9500
Syntax
show ip protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Usage
Information
The show output displays information on CPU traffic flows for IPv4 protocols, including the ingress queue
at which the traffic is queued and the CPU to which protocol traffic is sent with the applied rate limits
(configured or default) in kilobits per second (kbps). The egress port queues on CPUs are abbreviated as:
RP (Route Processor), CP (Control Processor), and LC (line card).
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell#show ip protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort Rate (kbps)
-------- -------- -------- ------- ----- ------
Control Plane Policing (CoPP) 441