Reference Guide

ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in
the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route flap dampening
information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset the flap statistics
on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all members of a peer-
group.
Command Modes EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
clear ip bgp ipv6 unicast dampening
Clear information on route dampening.
Z9500
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
network (OPTIONAL) Enter the IPv6 network address in x:x:x:x::x format.
network-mask If you enter the network address, then enter the network mask, from 0 to 128.
Command Modes EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
clear ip bgp ipv6 unicast flap-statistics
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Z9500
Syntax
clear ip bgp ipv6 unicast flap-statistics [network | filter-list list |
regexp regexp]
Parameters
network (OPTIONAL) Enter the IPv6 network address in x:x:x:x::x format to clear flap
statistics.
filter-list list (OPTIONAL) Enter the keywords filter-list followed by the name of a
configured AS-PATH list A maximum of 16 characters.
regexp regexp (OPTIONAL) Enter the keyword regexp followed by regular expressions. Use one
or a combination of the following:
386 Border Gateway Protocol