Reference Guide

Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
clear ip bgp * (asterisk)
Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the policies without
resetting the TCP connection.
Z9500
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast soft [in |
out] | soft [in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
ipv4 multicast
soft [in | out]
(OPTIONAL) This keyword sequence sets options within the a specified IPv4
address family.
ipv6 unicast soft
[in | out]
(OPTIONAL) This keyword sequence sets options within the a specified IPv6
address family.
soft (OPTIONAL) Enter the keyword soft to configure and activate policies without
resetting the BGP TCP session, that is, BGP Soft Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address soft, both inbound
and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Command Modes EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
clear ip bgp as-number
Reset BGP sessions. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the TCP connection.
Z9500
Syntax
clear ip bgp as-number [flap-statistics | ipv4 {multicast {flap-statistics
| soft {in | out}} | unicast {flap-statistics | soft {in | out}} | ipv6
unicast {flap-statistics | soft {in | out}| soft [in | out]
Parameters
as-number Enter an autonomous system (AS) number to reset neighbors belonging to that AS.
If used without a qualifier, the keyword resets all neighbors belonging to that AS.
The range is 1 to 65535.
Border Gateway Protocol 383