Reference Guide

Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In Receiver Only mode,
BGP saves the advertised routes of peers that support this capability when they restart.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
Z9500
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled.
Command Modes ROUTER BGP
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
The bgp log-neighbor-changes command appears in the show config command output.
Related
Commands
show config – views the current configuration.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
Z9500
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do not have their MEDs
compared).
Command Modes ROUTER BGP
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
378 Border Gateway Protocol